Network: HADOJO   
Joystick Vault

Joystick Image Hosting & Stick Builder Resource


Recent Photos 1 day 7 days 14 days all

TE Stick Dual mod Using DB25 Switch Diagram

Ragna_Joystick_Insid... 10.0
Hori Fighting Stick ... 10.0
PS1_Digital_Series_H... 10.0
Mame Cab 10.0
Teo´s first drawing,... 10.0
Soujistiks Custom 10.0
P4190532 10.0

Users 3,447
Photos 5,789
Comments 4,275
Views 49,158,999
Disk Space 1,939.4mb

Akihabarashop - Shoryuken - SDTekken - B15 SDM Designs - SlagCoin - PCB Resource - IPlayWinner - EventHubs

Click on image to view larger image

Poster: TMO Gaming  (see this users gallery)
· Date: 12/28/2007 · Views: 33183 ·
Rating: ********* 8.67
Keywords: Diagram for hooking up 2 PCBs in one stick
BB code:     
Direct link:     


Registered: February 2009
Location: sb county
Posts: 1
2/24/2009 1:18am

is it necessary to hook up the 5v and 3.3v?

Registered: March 2009
Posts: 1
5/21/2009 5:07pm

I believe the unplugged PCB will drain the voltage otherwise.

Registered: February 2013
Location: natural
Posts: 11
3/23/2013 10:43pm Rating: 10.00 

For if he like a madman lived, At least he like a wise one died.

Registered: June 2015
Posts: 1
6/19/2015 6:02am

I tried to design a joystick using the diagram above. Finally I made one but it didn't work well. One more is that the custom essay reviews college best did the required work for me.

Registered: September 2017
Posts: 1
9/7/2017 7:36am Rating: 6.00 

The straightforward objective in wiring is to have the grounds and flags of every gadget connected to the ground and wanted comparing signals on the PCB. Every gadget has switches; do my assignment for me when the switch is locked in, a circuit between the ground and flag should finish and send the flag from the PCB through a string or remote to the PC or support. Wires and connectors, patch, as well as bending, are utilized to interface the gadgets to the PCB.

Powered by: PhotoPost PHP
Copyright © 2006 All Enthusiast, Inc.